If you have complex routing requirements, then you may need to manipulate the network routing tables by adding static routes.

The Static Routes section displays the details about any static routes that are already defined for the appliance. To add a static route, click Add. The Static Route dialog is displayed.

The entries on the Static Routes dialog are as follows.

Entry Description
Destination type This drop-down list enables you to specify if the static route is for a Network subnet or a Host address.
Destination The IP address of a host or network located outside the subnet of the WebTitan Cloud appliance, to which data can be routed.
Mask The subnet mask for the destination host or network.
Gateway The IP address of the next hop intermediary that can be used to reach the destination host or network.
Active This check box indicates whether or not the static route is active.

Click in Options column to edit an existing static route.

Click in Options column to delete an existing static route.

Click Save to save changes to the DNS Settings section.


Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment